C2M
C2M is a 3-point tool for restarting ploughing and surface tilling. Ploughing depth can be adjusted up to 25 cm at 8 Km/h.
The various pitches that can be used on a single chassis make it a very versatile tool. With a choice of 4 possible tine models on 2 beams and seven types of equipment, C2M has a wide range of use.
C2M comes in 3 m, 3.5 and 4 metre fixed versions. There are also 4 to 6 m versions that fold hydraulically to 3 m for transport.
The power required is between 30 and 35 hp per metre, depending on the equipment.

- Tubular frame 100 x 8 mm / 2 entirely welded single piece beams.
- Beam centre distance: 750 mm.
- 3-point anti-rotation pin linkage between yokes:
- Spacing No.3 - Pin No. 2/3
- Choice of two tine densities for the same frame.
- Signalling as an option
Chassis width | 3M | 3M50 | 4M | |||
pitch | 250 | 350 | 235 | 325 | 250 | 320 |
number of tines | 13 | 9 | 15 | 11 | 17 | 13 |
Working width | 3M | 2M80 | 3M29 | 3M25 | 4M | 3M84 |
CHÂSSIS FIXED PUSHED LINKAGE
A choice of 2 models:
- 1 linkage model if using an 8 square 25 bar roller Ø 445.
- 1 shorter model if using the C2M without a roller.
- 1 pair of swivel wheels Ø 760 - 10.75 x 15/10 included in the price.
- Signalling as an option
chassis width | 3M | 3M50 | 4M | |||
Pitch | 270 | 350 | 325 | - | 270 | 320 |
Number of tines | 11 | 9 | 11 | - | 15 | 13 |
Working width | 2M70 | 2M80 | 3M25 | - | 4M | 3M84 |
FOLDING CHASSIS
- Entirely welded single piece central chassis, with 3-point anti-rotation pin linkage between yokes spacing No.3 - Pin No. 2/3
- Frame for 100 x 8 mm tubular extensions on 2 beams, entirely welded, 750 mm centre distance.
- Choice of two tine densities for the same frame.
- Hydraulic folding at 3 m in 2 parts, 2 double effect cylinders.
- Hydraulic locking of the extensions for transport and work.
- Signalling as an option
Chassis width | 4M | 5M | 6M | |||
Pitch | 250 | 320 | 250 | 310 | 250 | 300 |
Number of tines | 17 | 13 | 21 | 17 | 25 | 21 |
Working width | 4M | 3M84 | 5M | 4M96 | 6M | 6M |
The tines and ploughshares
Square tine 30 double coil springs. |
Square tine 35 double coil springs. |
Single blade Chisel tine 55 x 25. |
Double blade Chisel tine 55 x 25 + 20. |
Reversible ploughshare 75 x 13 x 345. Can be adapted on square tine 30, square tine 35. |
Reversible ploughshare 140 x 14 x 500. Can be adapted on square tine 30, square tine 35; Chisel single blade and Chisel double blade.
|
Reversible ploughshare 55 x 15 x 400.
Can be adapted to single blade and double blade Chisel tines.
|
Triangular ploughshare 350 x 8. |
- Fast replacement ploughshare possible.
|
- A wide selection of rear equipment
- Adjustment of equipment by multiple position sector pins.
- Self-aligning, lifetime greased bearings on the rollers and wheels.
The equipments
Comb harrow Ø 16 on 2 bars. Working length 500 m |
Notched disc double roller Ø 510 in V or in X. |
Retractable comb harrow, Ø 16 on 1 bar + 8 square bar 25 mm roller, Ø 445. |
Corrugated disc double roller Ø 510, pitch 125. |
Bipenta roller, double rotor Ø 400 with Ø 25 tines. |
Single notched disc roller Ø 510 in V or in X + 8 square bar roller Ø 445.
|
8 square bar, 25 mm, roller, Ø 445.
|
- Pair of retractable tyred wheels 10-ply Ø 535 x 168 on fixed C2M
|
- pair of wheels 10-ply Ø 535 x 168 on folding C2M
|
- disc crapper for corrugated disc double roller |
- Pair of lateral parallelogram deflectors with safety spring |
Safety :
Durability :
Efficiency :
- Uniquely, the rollers have mixing or resupporting action due to the effective work of the tines
- Hydromechanical locking of the extension for uniform work over entire working width
Comfort :
- Adjustment of working depth of the roller by pins on multiple position sector
- Adjustment of the orientation of the disc rollers by automatic pins (0 to 12°)
- Locking of extensions for transport without getting off the tractor
Quality :
Environment :
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |