C2M

Cultivator - Stubble plough

C2M is a 3-point tool for restarting ploughing and surface tilling. Ploughing depth can be adjusted up to 25 cm at 8 Km/h.
The various pitches that can be used on a single chassis make it a very versatile tool. With a choice of 4 possible tine models on 2 beams and seven types of equipment, C2M has a wide range of use.
C2M comes in 3 m, 3.5 and 4 metre fixed versions. There are also 4 to 6 m versions that fold hydraulically to 3 m for transport.
The power required is between 30 and 35 hp per metre, depending on the equipment.

C2M
FIXED CHASSIS
 

- Tubular frame 100 x 8 mm / 2 entirely welded single piece beams.
- Beam centre distance: 750 mm.
- 3-point anti-rotation pin linkage between yokes:
    - Spacing No.3 - Pin No. 2/3
- Choice of two tine densities for the same frame.
- Signalling as an option
 

 
Chassis width 3M 3M50 4M
pitch 250 350 235 325 250 320
number of tines 13 9 15 11 17 13
Working width 3M 2M80 3M29 3M25 4M 3M84

 

CHÂSSIS FIXED PUSHED LINKAGE

A choice of 2 models:
- 1 linkage model if using an 8 square 25 bar roller Ø 445.
- 1 shorter model if using the C2M without a roller.
- 1 pair of swivel wheels Ø 760 - 10.75 x 15/10 included in the price.
- Signalling as an option

 
chassis width 3M 3M50 4M
Pitch 270 350 325 - 270 320
Number of tines 11 9 11 - 15 13
Working width 2M70 2M80 3M25 -     4M 3M84

 

FOLDING CHASSIS

- Entirely welded single piece central chassis, with 3-point anti-rotation pin linkage between yokes spacing No.3 - Pin No. 2/3
- Frame for 100 x 8 mm tubular extensions on 2 beams, entirely welded, 750 mm centre distance.
- Choice of two tine densities for the same frame.
- Hydraulic folding at 3 m in 2 parts, 2 double effect cylinders.
- Hydraulic locking of the extensions for transport and work.
- Signalling as an option

Chassis width 4M 5M 6M
Pitch 250 320 250 310  250  300
Number of tines 17 13 21 17 25 21
Working width 4M 3M84 5M 4M96 6M 6M

The tines and ploughshares

Dent-carreé-30-double-spire.

Square tine 30 double coil springs.
Clearance 580 mm.

Dent-carre-35-double-spire

Square tine 35 double coil springs.
Clearance 720 mm.

Dent-Chisel-monolame

Single blade Chisel tine 55 x 25.
Clearance 670 mm.

Dent-Chisel-bilame

Double blade Chisel tine 55 x 25 + 20.
Clearance 690 mm.

Soc-reversible

Reversible ploughshare 75 x 13 x 345.  Can be adapted on square tine 30, square tine 35.

Soc-reversible-140x14x500

Reversible ploughshare 140 x 14 x 500. Can be adapted on square tine 30, square tine 35; Chisel single blade and Chisel double blade.
 

 

Soc-reversible-55x15x400

Reversible ploughshare 55 x 15 x 400. 
Can be adapted to single blade and double blade Chisel tines.

Soc-triangulaire-350x8

Triangular ploughshare 350 x 8.
Can be adapted on square tine 30, square tine 35.

Possibilite-de-soc-echange-rapide

- Fast replacement ploughshare possible.

 

 

- A wide selection of rear equipment
- Adjustment of equipment by multiple position sector pins.
- Self-aligning, lifetime greased bearings on the rollers and wheels.
 

The equipments

Herse-peignes-escamotable

Comb harrow Ø 16 on 2 bars. Working length 500 m

Double-rouleau-disques-creneles

Notched disc double roller Ø 510 in V or in X.

Herse-peignes-escamotable-rouleau8

Retractable comb harrow, Ø 16 on 1 bar + 8 square bar 25 mm roller, Ø 445.

 

Double-rouleau-disques-ondules

Corrugated disc double roller Ø 510, pitch 125.

Rouleau-bipenta-double-rotor-

 Bipenta roller, double rotor Ø 400 with Ø 25 tines.

Simple-rouleau-disques-creneles

 Single notched disc roller Ø 510 in V or in X + 8 square bar roller Ø 445.

 

 

 

Rouleau-8-barres

8 square bar, 25 mm, roller, Ø 445.

 

   

 

 

 

   

 

 

 

 

Paire-de-roues-pneus-escamotables

- Pair of retractable tyred wheels 10-ply Ø 535 x 168 on fixed C2M

 

Paire-de-roues-pneus

- pair of  wheels 10-ply Ø 535 x 168 on folding C2M

 

Decrottoir

- disc crapper for corrugated disc double roller

Paire-de-deflecteurs-lateraux

- Pair of lateral parallelogram deflectors with safety spring

 

Safety :

- Locking and unlocking of extensions for transport and work
- Transport width in accordance with the current regulations
- Extension with driven double cylinder to avoid falls
- Stand on folding version
 

Durability :

- Entirely welded solid solid frame, square tubing 100 x 8
- 3-point anti-rotation pin Nos. 2/3 on steel plate,thickness 20 mm
- Anti-rotation coupling pin on steel plate, thickness 15 mm
 

Efficiency :

- 2 possible tine pitches to adapt to working conditions and requirements
- Uniquely, the rollers have mixing or resupporting action due to the effective work of the tines
- Hydromechanical locking of the extension for uniform work over entire working width

Comfort :

- Self-aligning bearings with lifetime lubrication on rollers and wheels
- Adjustment of working depth of the roller by pins on multiple position sector
- Adjustment of the orientation of the disc rollers by automatic pins (0 to 12°)
- Locking of extensions for transport without getting off the tractor

Quality :

- Control at each stage of production
- Paint with polyurethane finish on epoxy finish
- Surface treatment before painting by conversion
- Final control before shipping, may be consulted on request

Environment :

- Slight facilitation of penetration of water on the surface
- Reduces erosion by preserving the clumps of soil on the surface, which slows water run-off and the action of the wind
 
 
securite1 securite2 efficacite1
efficacite2 confort1 confort2
 

 



Reserved space