POLYSOL

Danish Cultivator

PENTASOL and POLYSOL are mounted 3-point tools for preparing a seedbed making it possible to work at a depth of up to 15 cm and an optimum speed of 12 km/h.
Their immense versatility in terms of equipment, spacing and types of tine make them an ideal tool to cope with all types of soil and requirements. The tine distribution, over 4, 5 or 6 rows according to version, allows a flow which cannot be equalled.
There are fixed versions, 2.70 and 3.30 m and a folding version from 4.10 up to 8.10 m.
 

POLYSOL

The Chassis

- 3-point linkage between yokes No. 3 - Pins No. 2/3
- 100 x 8 mm tubular frame front/rear. Flat crossbeam 100 x10, entirely mechanically welded
- 4 steel tine-holder bars, 50 x 15, and 8 mm thick flange
- Possibility of installing a central roller (POLYSOL control) or two additional rows of tines (POLYSOL extrem)
- Hydraulic folding at 3 metres - by 2 double effect cylinders with hydraulic safety device
- Height adjustment for the first 2 rows of tines to install more powerful tines
- Signalling as an option

CAUTION:
100 and 120 pitch = 4 rows of tines = POLYSOL Control
80 pitch = 6 rows of tines = POLYSOL Extrem

 
  Fixed Folding
Width 2m70 3m30 4m10 4m70 5m30
Pitch 120 100 80 120 100 80 120 100 80 120 100 80 120 100 80
Nb of tines 22 26 32 26 32 40 34 40 52 38 46 58 44 52 66
 
  Folding
Width 5m90 6m50 7m10
Pitch 120 100 80 120 100 80 120 100 80
Nb of tines 48 58 72 54 64 80 58 70 88

 

The Tines

Dent-32x10-standard

Standard 32 x 10 tine. Clearance 390 mm.

Dent-32x12-standard

Standard 32 x 12 tine. Clearance 390 mm.

Dent-32x10-standard-contre-ressort

Standard 32 x 10 tine + counter spring.
Clearance 400 mm

Dent-32x12-droite

Straight 32 x 12 tine. Clearance
450 mm.

Dent-45x12-droite

Straight 45 x 12 tine. Clearance
430 mm.

Dent-45x12-standard

Standard 45 x 12 tine. Clearance
530 mm.

 

 

The Equipments

Simple-rouleau-crenele

-  Roller harrow with 7 notched bars Ø 270.

Simple-rouleau-croskillette

- Cast iron small diameter Crosskill roller harrow Ø 290.

Simple-rouleau-8-barres

- 8 square bar, 25 mm, roller harrow, Ø 320.

Herse-peigne

- Comb harrow Ø 10 with or without
roller with 100 mm pitch.

Lame-Flexiboard

- Flexiboard blade.

Herse-double-rouleau

- Double roller harrow with notched roller Ø 270 and flat bar roller Ø 320.

Herse-double-rouleau-avec--rouleau-barres

- Double roller harrow with flat bar roller Ø 320 and cast iron small diameter Crosskill roller Ø 290.

Planche-niveleuse

 Levelling board without tines at the front.

Planche-niveleuse--avec-dents

Levelling board with square tines,
25, reversible at the front.

 

 

 

   

 

 

 

 

Chape-pour-attelage-avance

PAIR OF YOKES TO MOVE FORWARD THE LINKAGE BY 150 MM

Effaceur-de-trace

SET OF 4 COMPATIBLE 25 MM
SQUARE TRACK ERADICATORS
PA- PN

Attelage-rouleau-arriere

REAR ROLLER LINKAGE

Jeu-de-bequilles-de-depose

SET OF 4 STANDS

Paire-de-deflecteurs

PAIR OF LATERAL DEFLECTORS
ON PARALLELOGRAMS.

Paire-de-roues-pneus

PAIR OF WHEELS, 10-PLY TYRES Ø 535 x 168.

Paire-de-roues-pneus-535x168

Pair of tyred wheels, Ø535 × 168 mm, 10 ply, retractable to stabilise the exten- sions on the folding version, without any risk of interfering with the tractor cab

Compteur-unite

UNIT COUNTER ON ROLLERS

1-roue-pneu

1 WHEEL 10-PLY TYRE Ø 535 X 168 (CENTRAL POSITION)

double-roues-centrales-assistance-au-reglage

DOUBLE CENTRAL WHEELS 10-PLY TYRES Ø 535 X 168 WITH ADJUSTMENT ASSISTANCE

compteur-d-unite-inviolable

UNIT COUNTER ON TYRED
WHEEL

jeu-de-1-bride

- SET OF 1 CLAMPING PLATE TO LOWER TINE 32 x 12 or 45 x 12

paire-dattelage-ecartement-n2

- LINKAGE PAIR SPACING CATEGORY No. 2

paire-de-roue-pneu-hydraulique

- PAIR OF WHEELS, 10-PLY TYRES Ø 535 x 168 RETRACTABLE, HYDRAULIC

 

 

 

Safety :

- Extension with driven double cylinder to avoid risk of falls
- Transport width in accordance with the current regulations

Durability :

- Solid frame, entirely welded, front and rear beams    100 × 8 mm
- 3-point anti-rotation pin Nos. 2/3 on steel plate, thickness 20 mm
- Anti-rotation coupling pin on steel plate, thickness 15 mm
- Steel tine holder blade 50 × 15 mm and flange 8 mm, housing 45 × 12 mm tines with greater clearance and greater strength

Efficiency :

- 5 rows of tines to encourage soil flow and the passage of plant debris
- Independent adjustment of the pressure of the double rear roller
- 3 possible tine densities in order toadapt to any type of terrain and the most demanding requirements
- Option to work difficult soil and optimise tractor power with 6 rows of tines on Polysol Extreme
- Option to work in floating position with 3-point lighting
 

Comfort :

- Self-aligning bearings with lifetime lubrication on rollers and wheels
- Adjustment of the roller depth by screw handle with control adjustment

Quality :

- Control at each stage of production
- Paint with polyurethane finish on epoxy finish
- Surface treatment before painting by conversion
- Final control before shipping, may be consulted on request

Environment :

- Slight facilitation of penetration of water on the surface
- Reduces the surface sealing of the soil
- Reduces the quantity of weeds at the time of sowing and thus reduces the use of chemical weedkillers
- Correct soil preparation promotes satisfactory crop root development, which allows optimal absorption of water and nutritive elements from the soil
 
solidite1 solidite2 efficacite
confort1    

 



Reserved space