PENTASEM
PENTASEM is a ride-on simplified seeding tool with tines, associated with pneumatic distribution,
adapted on a base close to that of PENTASOL.
It is used to plant a crop at high speed, using straight 45 × 12 tines fitted with a seed broadcaster. The positioning of the tines in 5 rows simplifies and improves the flow of plant debris without any risk of jamming.
The power required is 4 hp per tine for optimal use at 12km/h.

The Chassis- Solid, mechanically welded frame made from 100 × 8 mm tube front and rear and cross-member in flat 100×10 tube- 3-point coupling between No. 3 yoke – Pin No. 3/2 compatible with high power tractors - 50 × 15 steel tine holder bar and centre distance 350 mm between bars. Tine flange, thickness 8 mm - Hydraulic folding to 3 metres - by 2 double effect cylinders, with hydraulic and mechanical safety - Hydraulic furrow openers with discs for horizontal folding and hydraulic safety locking - Adjustment of the seed depth by fixed pneumatic depth control wheels, Ø 584 × 236 on central part - Oscillation system on the extensions to match the ground contour |
Fixed | Folding | |||||
Width | 3M | 3M50 | 4M | 4M80 | 5M60 | 6M |
Number of rows | 24 | 28 | 32 | 32 | 40 | 40 |
Inter-line (mm) | 125 | 125 | 125 | 150 | 140 | 150 |
Required power | 100 | 110 | 130 | 130 | 160 | 160 |
The Hopper
- Centralised hopper, mounted on 4 damper studs, with a capacity of 1,700 l on all models (over 1,200 kg load capacity).
- Distribution head ideally located outside the seed drill - Covered wide opening with high-speed opening and closing system for easy filling and cleaning - Powerful blower with extra-wide turbine (6 inches), providing an ultra-high volume of air. - Hydraulically-driven turbine for comfortable manoeuvre management - Filling height to 2.50 m with 4-step footrest and guardrail - Easy to access and ergonomically designed with quick flow test without any need for dismantling: - Quick and complete emptying of the hopper - Filtering sleeve |
The distribution
- Universal dispenser: for drilling every seed without changing the groove!
- The new universal dispenser offers record performance: unrivalled dosing range, from 1 kg/ha (little seeds) up to 450 kg/ha (large seeds) at 8 km/h and up to 330 kg/ha (wheat) at 12 km/h
- Easier flow rate adjustment and manoeuvres with the electrically-driven dispenser and «intelligent» in-cab console
- Active turbulence design: «excellent» distribution accuracy between rows
- The ADS system’s long, corrugated supply column guarantees a perfect, consistent mixture of air and seeds; the internal section of the head features a unique architecture, with no rebound areas, ensuring that the seeds flow smoothly and quickly.
- Easy row marking and row closing system (every other row, 2 out of 3 rows, etc.) with individual valves integrated into the distribution head. These valves even make it possible to change the row marker track if necessary.
- As well as the standard functions, the console also offers the following features:
- Half-drill shut off from the cab with proportional flow rate reduction
- Function «end of fields» for clear pound : elimination of lacks at the beginning of the run (automatic) or in case of stopped departure (manual)
- During row marking runs, automatic reduction of the drilling flow rate (saving seed), in proportion to the number of rows marked
- Fully simplified flow test (a single test without no crank handle; 10 kg load cell supplied; automatic adjustment of dosage/ha after recorded weight entered in the console)
- Emptying of the dispenser by activation electric motor starter button located at the rear of the hopper.
The rear equipments
- FLEXIBOARD front blade to stabilise the appliance and level soil before sowing |
- Comb Ø 10 harrow and (or) Ø 330 - 50 mm wide solid rubber-tyred wheel |
- Single disc sample marker (odd rate) × 2, (even rate) × 1
|
- Pairs of pneumatic depth control wheels fixed on extensions (inside)
|
- Double central wheels with 10 ply, 535 x 168 Ø tyres, with adjustment assistance |
- Pairs of pneumatic depth control wheels fixed on extensions (outside) |
- Marker eraser |
Safety :
- Extension with driven double cylinder to avoid falls
- Hydraulic markers with discs for horizontal folding and hydraulic safety locking
- 4-step footrest + platform with guardrail
- Width 3 m for transport for greater ease of transport
- Standard lighting and signalling
Durability :
• Steel tine holder bars 50 × 15 and tine flange thickness 8 mm
• Hopper mounted on 4 damper studs, avoiding stresses on the hopper
• 3-point anti-rotation pin Nos. 2/3 on steel plate, thickness 20 mm
• Anti-rotation coupling pin on steel plate, thickness 15 mm
Efficiency :
- Motorised drive for distribution proportional to advance by radar
- Seed depth controlled by pneumatic wheels
- Accuracy of seed distribution using on-board radar
- Oscillation lighting of extensions to adapt to variations in the terrain
- 3-point sensor for automatic shut-off of the distribution
Comfort :
- Wide hopper opening, with cover with high speed winding for easy loading from bags, in bulk or in big bags
- Adjustment of the depth control wheels by screw handle
- Equipment adjustment by screw handle, with position rule
- Bag for flow tests and scales supplied.
Quality :
Environment :
- Slight facilitation of penetration of water on the surface
- Preserves the organic composition of the soil by simplified surface working
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |