




Cultivator with discs
The fast cultivator !
XENOS HD is a polyvalent tool, limiting using cost (fuel consuming) & maintenance.
It allows to work at depths from 5 to 15 cm in the presence of important organic debris without risk of jamming.
Xenos HD is provided with notched discs (Ø510mm ou Ø610mm) to work in the most difficult conditions.
Those discs provide a large under beam clearance respectively from 800 mm and 900 mm to work even
with a large quantity of residues
Each disc is mounted on an independant arm with 100 % sealed hubs and oversized bearings to absorb efforts.
Each disc has a rubber shock absorber to provide elasticity.
Each rubber shock absorber has stops to be maintain despite vibrations.
Available from 3 to 6 m!


The frame
- 3 point Hitch between clevis N°2/3 – Pin N° 2/3
- Welded frame main tube square 300×300
- Front square beam 100×100 and rear rectangular beam 200×10
- 2 disc carrying bars 80×80 – inter-bar spacing 1 m
- Hydraulic folding at 2.50m – by 2 double acting cylinders, with hydraulic security.
- Hydraulical Locking and unlocking of the extension at work
- A pair of parallelogram mounted lateral deflectors
- Road light and signals included
The widths: from 3 to 6 m
Fixed Frame | Folding Frame | |||||||||
Width(m) | 3 | 3,5 | 4 | 5 | 6 | |||||
Type of discs (mm) | Ø510 | Ø610 | Ø510 | Ø610 | Ø510 | Ø610 | Ø510 | Ø610 | Ø510 | Ø610 |
Number of discs | 22 | 26 | 30 | 38 | 46 | |||||
Power requirement (hp) | 80 to 110 | 90 to 120 | 110 to 130 | 110 to 140 | 111 to 140 | 130 to 160 | 130 to 180 | 170 to 200 | 160 to 220 | 200 to 250 |
Weight (Kg)* | 1780 | 2055 | 1955 | 2280 | 2510 | 2885 | 3110 | 3585 | 3560 | 4135 |
* Depending on equipment (average value with flexible blade roller)
- Notched discs Ø 510mm, thickness 6
- Assembly at 260mm on a same beam
- Independent discs support
- Rubber shock absorber
- Sealed bearing & without maintenance
- Hub taken outside the disc.
- Attack angle is 17° on the travel direction and 7° on the lateral direction
- Spacing between two discs 135mm
- Under chassis clearance = 800mm
- Notched discs Ø 610mm ,th. 6
- Assembly at 260mm on a same beam
- Independent discs support
- Rubber shock absorber
- Sealed bearing & without maintenance
- Hub taken inside the disc.
- Attack angle is 17° on the travel direction and 7° on the lateral direction
- Spacing between two discs 135mm
- under beam clearance : 900mm
Well finished work
- It is possible to adjust the implement settings both easily, and without tools
- For the best results, opt for a rear packer roller (see the equipment page)
Designation | Picture | Use | ||||
Single 8 square bars (25mm) roller Ø445 with mechanical adjustment | ![]() |
Provide to crumble and re-press the worked layer | ||||
Simple roller 10 square beam 25 Ø 600 with mechanical adjustment | ![]() |
Provide a good load bearing capacity on light soil and low risk of stuffing | ||||
Double U roller Ø500 with mechanical adjustment | ![]() |
Performs an optimal consolidation of soil. At work, the U profile is filled with soil. The adhesion of the whole is improved and the slip roller is almost nonexistent. Extremely robust, U roller adapts to stony soils. The roller interlacing allows an optimal cleaning. | ||||
Single flexible blades roller Ø520 with mechanical adjustment and levelling blades | ![]() |
Performs an uniform settlement. At work, it is indifferent to bonding and stones. It is adapted for heavy and humid soils. | ||||
Double roller with flexible blades Ø520 with mechanical adjustment | ![]() |
Performs an uniform settlement. At work, it is indifferent to bonding and stones. It is adapted for heavy and humid soils. The roller interlacing allows an optimal cleaning. | ||||
Single U roller Ø 500 with mechanical adjustment +levelling blade | ![]() |
Performs an optimal consolidation of soil. At work, the U profile is filled with soil. The adhesion of the whole is improved and the slip roller is almost nonexistent. Extremely robust, U roller adapts to stony soils. | ||||
Single roller with Ø600 mm cutaway disks with mechanical adjustment | ![]() |
For consolidating the ground before setting up a false seed bed | ||||
Comb harrow Ø 16 with mechanical adjustment / 1 row for simple roller | ![]() |
Improve the straw decomposition |
SEMLOC: Drill at the same time!
- Sowing seed by surface broadcasting
- Hopper of 400 L
- Delivered with 2 feeder rollers (small or large grains)
- Hydraulically driven fan
- Dosage from 2 to 100 kg/ha -proportionnel
flow rate by radar - Loading platform included
Designation | Picture | Use | ||||
Semi-mounted kit | ![]() |
Reduce efforts in lift and consolidate manœuvres | ||||
Single roller hydraulic adjustment | ![]() |
Adjust the working depth from the tractor cab |
OPT FOR HYDRAULIC ADJUSTMENT
HIGHER ACCURACY FROM THE CAB
The XENOS enables you to control the depth from the comfort of your tractor cab.
- 1 Hydraulic pair exit for standard working
to relieve the carrying forward load when coupling et make easy transports.