XENOS

Cultivator with discs

The fast cultivator !

XENOS is a polyvalent tool, limiting using cost (fuel consuming) & maintenance.

It allows to work at depths from 5 to 15 cm in the presence of important organic debris without risk of jamming. 

Xenos is provided with notched discs (Ø510mm ou Ø610mm)  to work in the most difficult conditions.

Those discs provide a large under beam clearance respectively from 800 mm and 900 mm to work even
 with a large quantity of residues

Each disc is mounted on an independant arm with 100 % sealed hubs and oversized bearings to absorb efforts.

Each disc has a rubber shock absorber to provide elasticity.

Each rubber shock absorber has stops to be maintain despite vibrations.

Available from 3 to 6 m!

null
Double hydromechanical safety locking (transport and work)

null
2 typs of discss to be chosen

The frame

  • 3 point Hitch between clevis N°2/3 – Pin N° 2/3
  • Welded frame main tube square 300×300
  • front square beam 100×100 and rear rectangular beam 200×10
  • 2 disc carrying bars 80×80 – inter-bar spacing 1 m
  • Hydraulic folding at 2.50m – by 2 double acting cylinders,
    with hydraulic security.
  • Hydraulical Locking and unlocking of the extension at work
  • A pair of parallelogram mounted lateral deflectors
  • Road light and signals included

The widths: from 3 to 6 m

  • Notched discs Ø 510mm, thickness 6
  • Assembly at 260mm on a same beam
  • Independent discs support
  • Rubber shock absorber
  • Sealed bearing & without maintenance
  • Hub taken outside the disc.
  • Attack angle is 17° on the travel direction and 7° on the lateral direction
  • Spacing between two discs 135mm
  • Under chassis clearance = 800mm

  • Notched discs Ø 610mm ,th. 6
  • Assembly at 260mm on a same beam
  • Independent discs support
  • Rubber shock absorber
  • Sealed bearing & without maintenance
  • Hub taken inside the disc.
  • Attack angle is 17° on the travel direction and 7° on the lateral direction
  • Spacing between two discs 135mm
  • under beam clearance : 900mm

Well finished work

  • It is possible to adjust the implement settings both easily, and without tools
  • For the best results, opt for a rear packer roller (see the equipment page)

SEMLOC: Drill at the same time!

  • Sowing seed by surface broadcasting
  • Hopper of 400 L
  • Delivered with 2 feeder rollers (small or large grains)
  • Hydraulically driven fan
  • Dosage from 2 to 100 kg/ha -proportionnel
    flow rate by radar
  • Loading platform included

OPT FOR HYDRAULIC ADJUSTMENT

HIGHER ACCURACY FROM THE CAB
The XENOS enables you to control the depth from the comfort of your tractor cab.

  • 1 Hydraulic pair exit for standard working

to relieve the carrying forward load when coupling et make easy transports.