




Springtine cultivators
IDEAL FOR BIG ARABLE FARMING ZONE !
The most emblematic of our Springtine cultivators !
PENTASOL is the perfect tool for seed bed preparation thanks to its 5 lines of tines.
it can work up to 15cm at 12km/hour speed ! Equipped with, to be chosen, 5 typps of tines, spacing of 80, 100 or 120mm, an above reproach finition. Its wide range of equipment makes it a tool that adapts to all demands.
Available from 4,10 to 8,10 m !

The frame
- 3-Point hitch between clevis No. 3 Pin Nos. 2/3 – 4.10 to 6.50 models
- 3 points coupling N° 3/4 – model from 7,10 to 8,10 m
- Welded frame , monoblock, square tube 100x8mm front/rear and crossing 100×10
- 5 Tine carrying steel beams 50×15 – spacing 350mm between bars and bride th. 8mm.
- Hydraulic folding at 3m with 2 cylinders double acting and with hydraulic safety
- Road light and signals included
Width : from 4,10 to 8,10 m
Folding | |||||||||||||||||||||
Width(m) | 4,1 | 4,7 | 5,3 | 5,9 | 6,5 | 7,1 | 8,1 | ||||||||||||||
Inter-tine spacing (mm) | 120 | 100 | 80 | 120 | 100 | 80 | 120 | 100 | 80 | 120 | 100 | 80 | 120 | 100 | 80 | 120 | 100 | 80 | 120 | 100 | 80 |
Number of tines | 34 | 40 | 52 | 38 | 46 | 58 | 44 | 52 | 66 | 48 | 58 | 72 | 54 | 64 | 80 | 58 | 70 | 88 | 66 | 80 | 100 |
Power requirement (hp) | 85 to 130 | 95 to 145 | 110 to 165 | 120 to 180 | 135 to 200 | 145 to 220 | 165 to 250 | ||||||||||||||
Weight (Kg)* | 1420 | 1550 | 1700 | 1900 | 1970 | 2140 | 2350 |
*Depending on equipment (average value with 100mm tine spacing, standard tine 32X12, comb harrow Ø10 and double flat bar roller Ø320 and 7 notched bar Ø270)
Standard tine 32×12
+ straight reversible ploughshare
Clearance 390 mm
Straight tine 32×12
+ straight reversible ploughshare
Clearance 450 mm
Straight tine 45×12
+ straight reversible ploughshare
Under chassis clearance 430mm
Standard tine 45×12
+ reversible standard ploughshare
under chassis clearance 530mm
32X12 tine rapid flow tine
+ standard reversible ploughshare
under chassis clearance 390mm
The benefit of a 5 bars chassis
- PENTASOL benefit from 5 lines of tines to reduce the number of tines lined up and limit jaming risks.
- 5 lines of tines for an optimal soil flow, even with pronounced ploughing.
Well finished work
- It is possible to adjust the implement settings both easily, and without tools
- For a good finishing, opt for comb harrow and double roller
Designation | Picture | Use | ||||||||||
Flexiboard levelling board with mechanical or hydraulic adjustment | ![]() |
Allow to level soil before tine pass | ||||||||||
Levelling board without tines all with reversible square 25 tines | ![]() |
Allow to level and break crust before tine pass | ||||||||||
Comb harrow Ø10 100mm spacing without roller, available with single or double roller | ![]() |
Allow to regulate and level soil flow, eliminate opening from the last line of tine | ||||||||||
Single 7 notched bars roller Ø270 | ![]() |
Provide to crumble and re-press the worked layer. | ||||||||||
Single crosskillette roller Ø270 | ![]() |
Allow an intensive repress of work | ||||||||||
Single 7 flat bars roller Ø320 | ![]() |
Provide to crumble and re-press the worked layer. | ||||||||||
Simple roller 7 bar square 25mm Ø 320 | ![]() |
To stabilize and control working depth | ||||||||||
Single 8 square bars (25mm) roller Ø380 | ![]() |
|||||||||||
Single 8 square bars (25mm) roller Ø445 | ![]() |
|||||||||||
Double roller 7 flat bars roller Ø320 and crosskillette Ø290 | ![]() |
Allow an ideal repress of double roller on the back | ||||||||||
Twin roller 7 flat bars Ø 320 and 7 notched bars Ø 270 |
![]() |
Allow a full control of springtine cultivator Also allow to break up and repress the worked surface with intensively |
||||||||||
Double 7 notched bars roller Ø270 | ![]() |
|||||||||||
Double 7 flat bars roller Ø320 | ![]() |
|||||||||||
Double 7 square bars (25mm) roller Ø320 and 7 notched bar roller Ø270 |
![]() |
|||||||||||
Double 8 square bars (25mm) roller Ø380 and Single 7 square bars (25mm) Ø320 |
![]() |
Designation | Picture | Use | ||||||||||
Advanced universal hitch | ![]() |
Adapts itself to the tractor’s constraints | ||||||||||
Pair of wheels with 10-ply 535×168 mm tyres with track adjustable from 5.90 to 8.10 m | ![]() |
Stabilize the chassis in working depth | ||||||||||
1 rubber wheel 10 plys Ø535×168 mm (central position) | ![]() |
|||||||||||
Double central wheel 10 plys Ø535×168 mm with assistancy in adjustment | ![]() |
|||||||||||
Set of 4 wheel mark eradicators, 25 square compatible with the flexiboard blade | ![]() |
To eradicate tractor wheel marks | ||||||||||
Set of 1 bride for lowering 32×12 tine (45mm) | ![]() |
|||||||||||
Set of 1 tine for lowering 45×12 tine (45mm) | ![]() |
|||||||||||
A pair of parallelogram mounted lateral deflectors | ![]() |
To avoid soil being thrown up | ||||||||||
Set of 4 stands | ![]() |
Stabilize the implement at rest |