Home • POLYSOL

OUR SPRINGTINE CULTIVATORS

Ideal for polyculture zone !

An incomparable finish in the preparation of seed beds !

With its central roller surrounded by 2 rows of tines at the front and back, the Polysol fits perfectly for potatoes, sugarbeets or for lands that generates a lot of clods.
It can work up to 15cm at 12km/h speed ! Fitted with tines 45×12 or 32×12, its atypical frame allows it to receive two sizes of tines to carry out two works in a single passage.
Its wide range of equipment makes it a tool that adapts to all demands.

Available from 4.10 to 7.10 m!

See specifications

Hydraulic locking safety (transport and work)
4 types of tines and 2 spacing to be chosen. Front tine holder adjustable on working height

A demonstration ?

Make a request

The documentation

Download the documentation

Our importers

View the map

The product notice

Download the notice

Spare parts

Discover

Download the catalogue voucher
(This can be found in the instruction leaflet)

POLYSOL>NOTICE>38011705

Download the notice

THE FRAME

3-Point hitch between clevis No. 3 Pin Nos. 2/3 – 4.10 to 6.50 m models
3 points coupling category N° 3/4 – 7,10 m
Welded frame , monoblock, square tube 100x8mm front/rear and crossing 100×10.
4 tine carrying steel beam 50×15 and bride th. 8mm

Central roller is possible
Adjusment in high for the 2 first rows of tines
Hydraulic folding at 3m with 2 cylinders double acting and with hydraulic safety
Road light and signals included

Our recommandations

Widths : from 4,10 to 7,10 m

	FOLDING
Width (m)	4,1		4,7		5,3		5,9		6,5		7,1
Inter-tine spacing (mm)	120	100	120	100	120	100	100	120	100	120	100	120
Number of tines	34	40	38	46	44	52	58	54	64	58	70	66
Power requirement (hp)	100 à 120		115 à 140		130 à 160		145 à 175		160 à 190		175 à 210
Weight (kg)*	1910		2080		2290		2520		2770		3120

*Depending on equipment (average value with 100mm spacing, 45×12 standard tine in the front, central bar roller Ø380mm, 32×12 tine in the back, comb harrow, and double roller 7 flat bars Ø320mm and 7 notched bars Ø270mm)

Strong points

LES AVANTAGES D’UN ROULEAU CENTRAL

WELL FINISHED WORK

It is possible to adjust the implement settings both easily, and without tools
For a good finishing, opt for comb harrow and double roller

TINES

Standard tine 32×12 + straight reversible ploughshare Clearance 390 mm

Straight tine 32×12 + straight reversible ploughshare Clearance 450 mm

Straight tine 45×12 + straight reversible ploughshare Under chassis clearance 430mm

Standard tine 45×12 + reversible standard ploughshare under chassis clearance 530mm

THE EQUIPMENTS

Lame Flexiboard avec réglage mécanique ou hydraulique

Planche niveleuse sans dents ou avec dents carré 25mm réversibles

Herse peigne Ø10mm au pas de 100mm sans rouleau, compatible avec simple et double rouleau

Simple rouleau 7 barres crénelées Ø270mm

Simple rouleau croskillette fonte Ø290mm

Flexiboard levelling board with mechanical or hydraulic adjustment

Levelling board without tines all
with reversible square 25 tines

Comb harrow Ø10 100mm spacing without roller, available with single or double roller

Single 7 notched bars roller Ø270mm

Single crosskillette roller Ø270mm

Simple rouleau 7 barres plates Ø320mm

Simple rouleau 7 barres carré 25mm Ø320mm

Simple rouleau 8 barres carré 25mm Ø380mm

Simple rouleau 8 barres carré 25mm Ø445mm

Double rouleau 7 barres plates Ø320mm et croskillette fonte Ø290mm

Single 7 flat bars roller Ø320mm

Simple roller 7 bar square 25mm Ø320mm

Single 8 square bars (25mm) roller Ø380mm

Single 8 square bars (25mm) roller Ø445mm

Double roller 7 flat bars roller Ø320mm and crosskillette Ø290mm

Double rouleau 7 barres plates Ø320mm et 7 barres crénelées Ø270mm

Double rouleau 7 barres crénelées Ø270mm

Double rouleau 7 barres plates Ø320mm

Double rouleau 7 barres carré 25mm Ø320mm et 7 barres crénelées Ø270mm

Double rouleau 8 barres carré 25mm Ø380mm et 7 barres carré 25mm Ø320mm

Twin roller 7 flat bars Ø320mm and 7 notched bars Ø 270mm

Double 7 notched bars roller Ø270mm

Double 7 flat bars roller Ø320mm

Double 7 square bars (25mm) roller Ø320 and 7 notched bar roller Ø270mm

Double 8 square bars (25mm) roller Ø380mm and Single 7 square bars (25mm) Ø320mm

THE OPTIONS

Attelage avancé universel

Paire de roues pneu 10 plis Ø535 x 168 mm de 5m90 à 8m10

1 roue penu 10 plis Ø535 x 168 mm (position centrale)

Doubles roues centrales 10 plis Ø535 x 168 mm avec assistance de réglage

Jeu de 4 effaceurs de trace carré 25 compatible lame Flexiboard

Advanced universal hitch

Pair of wheels with 10-ply 535×168 mm tyres with track adjustable from 5.90 to 8.10 m

1 rubber wheel 10 plys Ø535×168 mm
(central position)

Double central wheel 10 plys Ø535x168mm with assistancy in adjustment

Set of 4 wheel mark eradicators, 25 square compatible with the flexiboard blade

Jeu de 1 bride pour abaisser dent 32×12 (45mm)

Jeu de 1 bride pour abaisser dent 45×12 (45mm)

Paire de déflecteurs latéraux sur parallélogramme

Jeu de 4 béquilles

Set of 1 bride for lowering 32×12 tine (45mm)

Set of 1 tine for lowering 45×12 tine (45mm)

A pair of parallelogram mounted lateral
deflectors

Set of 4 stands

More pictures

Brochures

Haut de page