Compacting Rollers
Crumble, level and press more with a reinforced stability !
With its self-directional system and its tires 10.75 X 15/10 (Ø 760) its robustness is no longer to be demonstrated.
Compact frame with high visibility
Equip it with 45X12 tines to improve its efficiency and homogenize the tillage.
Scrapers are included.
Available from 1.5 to 6m !
The frame
- 3 point hitch with semi-automatic bar n°2 on 4 pressing points
- Squaretube 140mm frame rigid or folding at 2,5m, auto-directionnal with spring
- 2 pairs of pneumatic wheels 10;75X15/10 (Ø 760) with pivoting on an axle Ø60 offset to the front, boot scraper included
- Self steering wheels with centering by springs on the extension with spacing adjustment.
- Axles mounted on polyamide bushings
- Rear parking stand
- Road markers included
The benfit from an auto-directionnal chassis
- TASSAPNEU benefit from an auto-directionnal system for an accurate drive and effortless
Well finished work
- For higher efficiency, opt for a front tine equipment.
Width : from 1,5 to 6 m
| Fixed | Folding | ||||||
| Width (m) | 1,5 | 3 | 3,5 | 4 | 4,5 | 5 | 6 |
| Number of spires | 4 | 8 | 8 | 8 | 8 | 8 | 12 |
| Weight (Kg) | 400 | 760 | 830 | 830 | 830 | 830 | 1185 |
| Designation | Pictures | Use | ||||
| Front equipment with 32X12 tines on 3 bars 120mm spacing, under chassis clearance 450mm |
 |
Provide more intense working at a shallow depth | ||||
| Front equipment with 45×12 tines on 3 bars 160mm spacing, under chassis clearance 430mm |
Allow a more depth work in hard and stony conditions | |||||
| Tassapneu | Fixed | Folding | ||||||||
| Width (m) | 3 | 3,5 | 4 | 4,5 | 6 | |||||
| Inter-tine spacing (mm) | 120 | 160 | 120 | 160 | 120 | 160 | 120 | 160 | 120 | 160 |
| Number of tines | 25 | 19 | 29 | 21 | 33 | 25 | 39 | 29 | 51 | 39 |
| Power requirement (hp) | 50 | 40 | 60 | 40 | 65 | 50 | 80 | 60 | 100 | 80 |
Improve efficiency ang homogenize soil work
| Designation | Pictures | Use | ||||
| Weight frame |  |
Increase the front mounted weight transfer | ||||
| Front hopper attachment |  |
Allows using a front hopper on the front compactor. | ||||
| 3-point hitch linkage |  |
Mounting a one-piece weight on the front of the tractor. | ||||
| A pair of parallelogram mounted lateral deflectors |  |
To avoid soil being thrown up. | ||||
| Wide angle rearview mirrors |  |
To ensure good visibility during transport | ||||
| Parking stand |  |
For increased stability of folding implements when parked | ||||
